# How to read your glasses size: the frame measurements explained

> What the numbers 52□18 140 on the temple mean, how to find your size from glasses you own, and what an online optical store should show on the product page.

Canonical: https://provei.ai/en/blog/how-to-read-eyeglass-frame-size
Last updated: 2026-11-21

[Back to the blog](https://provei.ai/en/blog)

What the numbers 52□18 140 on the temple mean, how to find your size from glasses you own, and what an online optical store should show on the product page.

November 21, 2026 • Provei AI • 6 min read •

Eyewear Measurements Size Online Optical Store Product Page

In this article

This article is divided into sections. Browse the topics below to find the information you need.

TL;DR

**The size of a frame is three numbers printed on the inside of the temple, such as 52□18 140.** In millimeters, the first is the width of each lens, the second is the bridge (the gap between the lenses, over the nose) and the third is the length of the temple. The simplest way to find your size is to read those numbers on the glasses you already wear and find comfortable, then look for frames with similar measurements. If your frame has no numbers, you can measure it with a ruler. For an online optical store, showing these three measurements on every product is the most direct way to answer “will this look too big on me?”.

1

## What each number means

The sequence follows the boxing system, standardized by ISO 8624 (in Brazil, ABNT NBR ISO 8624). The small square between the first two numbers is the symbol of that system. Sometimes it appears as a hyphen.

| Measurement           | In the example | What it is                                                                  | Common values                    |
| --------------------- | -------------- | --------------------------------------------------------------------------- | -------------------------------- |
| Lens width (eye size) | 52 mm          | Horizontal width of one lens, edge to edge                                  | From the 30s to the 50s mm       |
| Bridge                | 18 mm          | Shortest distance between the two lenses, where the frame rests on the nose | From 14 to 24 mm                 |
| Temple                | 140 mm         | Length of the "arm" of the glasses, from the hinge to the tip               | Almost always 135, 140 or 145 mm |

The numbers are usually on the inside of one of the temples. On rimless frames or some metal models, they appear on the bridge. They often come with the model and color code, which have nothing to do with size.

2

## How to find your size in three steps

1

Take the glasses that fit well Step 1

Use a pair that does not press on the temples, does not slide down the nose and leaves no marks. It can be prescription or sunglasses.

2

Read the temple Step 2

Write down the three numbers. If there are no numbers, measure with a ruler in millimeters, as in the box below.

Compare with the model you want Step 3

Look for the same three measurements on the product page. Measurements close to yours point to a similar fit on the face.

#### No numbers on the temple? Measure like this

Rest the glasses on a table with the lenses facing down. Lens width: from one edge of a lens to the other, at the widest part, inside the rim. Bridge: the smallest space between the two lenses. Temple: from the hinge to the tip, following the curve. For the total width, measure the whole front of the frame, from one end to the other.

3

## Two frames with the same sum are not the same size

Adding the lens width and the bridge gives the distance between the centers of the two lenses. For 52□18, that is 70 mm. A 54□16 frame also adds up to 70, but it does not fit the same way: the lenses are wider and the bridge is narrower, so it sits differently on the nose and at the sides of the face. Compare the two measurements separately, not just the sum.

The bridge matters a lot for comfort. A bridge that is too narrow makes the frame sit high and pinch the nose; too wide, and it slides down. If you can only check one number, start with the bridge.

4

## What the numbers do not tell you

- **The lens height**, which changes how much of the face the frame covers and matters for multifocal lenses. Some optical stores list this measurement separately.
- **The shape**: a round 50 mm lens and a square 50 mm lens take up the face in different ways.
- **The adjustment of the nose pads and temples**, which the optical store does at the counter on metal frames and on some acetate ones.
- **The measurements for mounting the prescription lens**: pupillary distance and fitting height are taken on your face, not on the frame.

To see how the shape looks on your face, the way to go is to try it on, in a physical store or in a [virtual try-on for glasses](https://provei.ai/en/blog/virtual-try-on-for-eyewear). The try-on shows the frame on your face, but it does not measure whether it fits: the measurement is still the three numbers.

5

## For online optical stores: how to show size on the product page

Doubt about size is one of the most common when buying glasses online, and the answer is already engraved on the frame. The store’s job is to put it on the page in a way the customer understands.

- The three measurements on every product, in the standard format "52□18 140", with one line explaining each number.
- Total frame width and lens height, when the supplier provides them.
- A link to a short guide on how to read the temple of the glasses the customer already has.
- A filter by lens width or by total width in the listing, for those who already know their own size.
- The same measurements in the virtual try-on, next to the result, so the visual decision and the size decision happen together.

In [Provei’s glasses try-on](https://provei.ai/ajuda/en/provador-virtual/oculos/), the store fills in the Frame specifications for each product: lens width, bridge, temple, total width, material and lens type. With lens width and bridge filled in, the try-on result shows the “Armação” (frame) line in the format optical stores use, such as 52□18 140, next to the customer’s selfie wearing the glasses.

6

## How this guide was made

Written by the Provei.AI team, with AI assistance in research and drafting. The definitions and value ranges come from the Optogrid guide to the boxing system, which cites ISO 8624 and ABNT NBR ISO 8624. How the try-on works comes from Provei’s Help Center. This guide does not replace measurements taken by an optical professional for prescription lenses.

Sources checked on 11/15/2026: [Optogrid, “Sistema boxing dos óculos: como ler 52-18-140”](https://www.optogrid.com/pt-blog/sistema-boxing/) (in Portuguese; “The boxing system for glasses: how to read 52-18-140”); [Provei Help Center, “Glasses try-on”](https://provei.ai/ajuda/en/provador-virtual/oculos/).

### The frame measurement next to the try-on

Glasses try-on by selfie, with the color chosen on the page and the frame size in the result.

[Talk to the team ](https://provei.ai/en/contact)[See how it works](https://provei.ai/ajuda/en/provador-virtual/oculos/)

## Related

- [Português (Brasil)](https://provei.ai/blog/como-saber-o-tamanho-do-oculos)
- [Pop-ups for clothing stores: which to use, when, and what to avoid](https://provei.ai/en/blog/pop-ups-for-clothing-stores)
- [Live commerce for fashion brands: how to do it and when it pays off](https://provei.ai/en/blog/live-commerce-for-fashion-brands)
- [Clothing store exchange and return policy in Brazil: law and template](https://provei.ai/en/blog/exchange-and-return-policy-for-clothing-stores-in-brazil)
